How to mount a springboard? – Sweek's advice

Have you just bought a springboard and your children can't wait to enjoy it? Sweek gives you the right ones advise deposit Help yourself to quickly and easily set your springboard keeping in mind the points of safety For use with confidence! Both for the trampolines with an internal or external net, we give you the different phases to mount the frame, the soft, skip the canvas, the protective cushions or the net. In addition to your instructions, our advice will allow your children to quickly enjoy their new game!

Choose the position of the springboard

THE first step Before the assembly of yours trampoline It is finding the Good location Depending on the size of the trampoline. It must be installed on a file surface plan To prevent the inclination of the structure and avoid falls. Avoid inclined soils or holes. The slope could weaken the structure of the springboard while jumping.

You must have a free surface of 2 m around the springboard. For example, the springboard cannot be blocked against a wall because a child who does not control his jumps well could beat and injure himself. Check that the trampoline It is not below a line of power or a tree for example. Also avoids positioning the net trampoline near a swimming pool or near a road if your garden is not fenced. Remember to find a Position in the houseto be able to keep an eye on yours children.

Discover our videos below to accompany you in the different stages of the assembly. Our videos are for trampolines with an internal or external network. One of the videos shows that you like to install the rope around the jump canvas.

Install the springboard on a soft floor

Ideally, Install THE trampoline on one Sol Mouable to absorb violent shocks. A bark floor can very well make makeup. Banish hard surfaces such as the concrete or theasphalt. The ground must also be compact so that the springboard does not sink due to the jumps.

Check the different parts of the trampoline

Once theAdequate position foundWe attack his installation. Place the boxes near the place where you are going to mount and check that there is no part of the part before the assembly. You must have received several boxes with the different parts, so don't forget to empty them all. Distribute the contents of the box on the ground to better view spare parts. In the event that you lose a part of the trampoline, contact the customer service immediately because a single missing piece could prevent you from mounting the springboard.

You will surely have many very small pieces. To be better organized, take the time to order and group the parties based on the parts on which they will be used.

Adequate tools for its installation

Get a electric screwdriver preferably and a rubber bat To correctly consolidate the structure and guarantee good resistance. A accessory to lengthen the springs and Pair of gloves He will prevent you from getting back your skin and hurting you. Do not forget to check the assembly instructions to find out what kind of screwdriver or tightening keys you need.

The 3 key steps for a perfect springboard

The installation of a springboard is performed in 3 subsequent steps And it lasted only about forty minutes if you have 2.

• THE first step is the Mount the structure. The feet of the U -shaped trampoline are very simple to assemble. They consist of one or more tubes that meet in each other with a notary T. -shaped connection until a circle is obtained and assembles the feet with the fittings. If the feet do not adapt easily, you can use a hammer but do not type too much and use the protection as a towel to amortize the blows. When the frame is mounted, install the dice and bolts in their respective positions. Before screwing, make sure the parties are well mounted and retain correctly in the right position. We advise you to use an electric screwdriver rather than that will allow you to correctly drive the screws and be faster than with a manual screwdriver.

• Once the structure is mountedIt remains to assemble the canvas, the springs and the installation of the safety pillow. Start with Hang the springs around the holderDo not hesitate to ask for help to be able to align the jump canvas more easily putting on two opposite sides of the frame. Don't forget Check the meaning of the springs Before installing them. So hang on the irrigator jumping canvas, make sure it is well stretched and centered. When this step is performed and the canvas well laid, Place the protective pillow on the sources And fix it under the structure to keep it in the trampoline. Will allowActivate a possible fallHe will avoid the accident and also protect the springs.

• THE Last step it is composed of Install the security network As well as its quantities to protect the springboard well. Not all trampolines have a safety network, but we still recommend buying a springboard with a protective network because it is a significant protection for the safety of your children. Start aligning the pipes of the protective support in front of each foot of the trampoline. Correct the mesh pipes on the pipes of the foot foot's feet using two long screws. Net the tubes on the net and slide the entire protective network. Finally, correct the hooks of the net to the triangular rings of the canvas jump.
  Once the assembly is finished, test the springboard to make sure it is well mounted. Get some jumps on it to make sure the structure is very stable. If the structure seems a bit unstable, use a screwdriver to tighten all parts. If everything is very stable, you can start having fun!
  We advise you not to use a springboard on which there are not all the springs. The canvas could tear and you can hurt you.

The anchoring kit for optimal stability

For cautious, you can also Strengthen everything with an anchor kit To stabilize the springboard and ensure maximum safety. This will also allow Keep the equipment on the ground In case of strong gusts of wind. AND Kit d'Ancrage Standard of Trampolino de Contains 4 steel routes and 4 adjustable nylon straps. After screaming the routes deeply in the ground on each side of the trampoline, fix and tighten the straps to keep it in place. These Anchoring kit for the trampoline They are by far the most effective way to stabilize a springboard. They resist twenty, rain, hail and shock caused by repeated jumps.

Now you have all the information to correctly mount your springboard. Start by choosing the ideal surface to install the springboard. The floor must be very flat and stable. So collect your tools and check that there is no part. It is therefore possible to start installing the springboard. Start by mounting the structure, then the springs, the jump canvas and protective cushions. It is therefore possible to install the security network. For optimal stability, do not forget the anchoring kit that offers you further safety.

Sweek selection

370 cm diameter – Saturn trampoline

305 cm trampoline interior net – Internal Mars

Fillet protection of 370 cm trampoline fillet