How to install and install a bioclimatic pergola? – Sweek's advice

Did you make your choice of bioclimatic pergola? The installation project on your terrace can now start. Position, preparation, tools and assembly, we give you all the steps to be observed so that your pergola is correctly installed and you can enjoy this pergola with adjustable blades as quickly as possible.

How to choose the position of your bioclimatic pergola?

Before starting to install your bioclimatic pergola, you must make sure to comply with all local regulations. For more information on this topic, do not hesitate to consult our articles: we should declare a bioclimatic pergola in the town hall and in the pergola: regulations and administrative procedures

Once you are sure everything is in order, you can choose the position of your bioclimatic pergola. It should be easily accessible and should not disturb other installations in your garden. Take into account the size of your new pergola to determine the location. If your outside is not very large, a pergola leaning against your home will be more practical. A bioclimatic pergola car -Sostensa can be installed everywhere, but urban planning rules must be respected. It can be positioned on the terrace, right in the middle of the garden or near a swimming pool if you have one. The ideal is to choose a flat and solid floor.

You can therefore organize the installation keeping in mind that a whole day will be needed and that 2 people will not be too much for the assembly. The posts will be really easier to manage to 2 than alone.

You can therefore organize the installation keeping in mind that a whole day will be needed and that 2 people will not be too much for the assembly. The posts will be really easier to manage to 2 than alone.

What are the tools that are expected for the installation of a pergola?

Start by collecting all the equipment and tools you need.

• Performance equipment: drill, screwdriver, wicked and screwdriver
• Measurement and marking tools: metro, level of bubbles or laser, pencil and marker.
• Customs to be cut: Sega greets, circular or metal
• The equipment necessary for anchoring on the ground: Chemical ankles or fixing plates depending on the type of soil.
• Protective equipment: Gloves, glasses and protective helmet

Before entering the Assembly, read the instructions carefully several times to integrate them well for D -Day.

How to prepare the floor for the installation of your pergola?

The support in which you will install the pergola must be prepared upstream.

• For a concrete slab: A drill and a wick will be enough but it will be necessary to check that the slab is flat.
• For a terrace: Depending on the floor of your terrace, you will have to provide suitable tools: ankles, type of lives, etc.
• For a furniture floor: The concrete bases must be carried out for the installation of posts. To know the depth of the bases, take a third of the length of the poles.

Follow the instructions and set the structure

After preparing the floor, you can mount the structure by following the steps in the instructions.

The pillars, beams and blades of the Pergola will have to be excavated. To start, we advise you to notice the positions of the fixing points. Draw the points using a marker on the cement slab or on the terrace. For this step, it is important to verify that the points are well aligned and spaced.

Then comes the assembly of the structure with the poles, crossbars and adjustable blades. All elements must be well fixed and their justice must be controlled with a level.

For a supported pergola: The wall radius must be resolved before the posts. It is enough to pierce the holes in the wall that will welcome the ray with a concrete forest. Start by marking the fixing points on the wall before perforation. The wall can be protected with agglomerated support. The screws and ankles must be adapted to the type of wall so that the fixation is well over time. Depending on whether the wall is concrete or brick, the tools will not be the same. Finally, the fixation of the 2 posts in the structure must be performed as for the 4 seats of a car bioclimatic pergola -sustensate.

The most important thing is to follow the passages of the instructions well so as not to be blocked at a certain point. Once the structure and the whole set are completely mounted, it is possible to add accessories to the bioclimatic pergola as curtains or lighters.

Sweek selection

Blade adjustable in aluminum and pergola bioclimatic 3x4m – Palace

Adjustable blade pergola bioclimatic 3 × 3 white – triumph

Adjustable blade pergola bioclimatic 3 × 4 anthracite – triumph